Connect your systems

Sync items, bill of materials and files between Vault and your ERP system, in a modern and easy way.
powerJobs connects Vault to any ERP system, in a direct way. When you push the button, it happened, now!

connect with ERP

Connect Vault with any ERP system in modern way

powerGate »
powerEvents

share with ERP

Make PDFs accessible to purchase and shop floor.

powerJobs »
powerEvents

align with ERP

Release files only if part numbers are in sync with ERP.

powerEvents »

Connect your engineering with the rest of the company

powerGate allows you to create and update items in the ERP system, from within Vault and CAD. It transfers your engineering BOM. It shares PDFs to purchase. It can be tailored to behave the way you want, and do what you want.

Sync items with your ERP

No need to switch between applications. Create and update ERP items directly from within Vault.

Extend your Vault client with powerGate. It will show you ERP item information in the context of your Vault file or item. Also, you will be able to create and update ERP items with Vault data, right from with Vault. This will strongly improve you working performance and experience.

Sync bill of materials with ERP

Getting the BOM in the ERP becomes simple and trasnparent with powerGate. The BOM transfer dialog gives you insight on the changes you will perform.

Creating a BOM in ERP is simple. Updating an existing BOM might be more complex. The BOM transfer dialog of powerGate, checks the state of all your items, compares the BOM with the ERP BOM and gives you feedback on what will be added, removed or changed. This way, you become aware of the impact of your changes, before those will be applied.

Share PDFs with your ERP

Making PDFs, DWG, DXF files accessible to the purchase department and shop floor is a huge benefit for the whole company. Sharing such files automatically when new versions are released is mandatory.

powerGate in combination with powerJobs can create neutral formats of your CAD files and make those available to the ERP system, automatically on each release. Depending on the capabilities of the ERP system, the files might be just in a shared folder accessible by the ERP system, or even stored directly within the ERP system.

In the case of SAP, files will be stored in the according document info record (DIR). Such DIR might be created by powerJobs/powerGate, linked with the according SAP material, the PDF uploaded as original to the DIR and finally set the state to released with SAP.

In the case of other ERP systems, like Microsoft Dynamics NAV, the PDF might be put on a network share and the ERP will be just informed that a new PDF is read for the given ERP item.

Sync Vault workflows

Extend your Vault lifecycle with checks against your ERP system. Make sure that wehn you release a file or item, it is in sync with the according ERP item.

powerEvents in combination with powerGate can talk to the ERP System on given Vault actions. For instance, you may check whether the part number used in Vault, is valid in ERP, and if not, prevent releasing the file. Or automatically update ERP item inforamtion, when releasing the according file or item in Vault.

With powerEvents and powerGate, you can drastically improve the quality of your data, and make sure that when something gets released, then all the related information in Vault and ERP are truly in sync.

With and without Vault items

powerGate can transfer both, the CAD and item bill of material. This means you can work with Vault items, but you don't have to.

In case you work with Vault Workgroup or Vault Professional, but don't want to use items, powerGate leverages the CAD BOM for the transfer to ERP. In case you want to use the item master of Vault Professional, that is welcome as well!

From within Vault and CAD

Create items while you are working in CAD, and use the item number for driving file information of your CAD bill of material.

powerGate works hand in hand with Vault Data Standard, which means that the communication to the ERP system can happen from within Vault, Inventor and AutoCAD. For instance, you may create an ERP item, from within Inventor, while you are saving a new file and want to either link it with an existing item or create a new one. Also, you can perform an ERP item search from within your CAD application and insert the item as virtual component, or part reference. This way, your CAD BOM becomes complete and correct in the first place, while you are designing, without leaving your CAD application.

A direct integration

powerGate operations are immediate and direct. No need for file sync, no delay, no data redundancy. Once an operation is done, it is DONE! And if not, then you'll know it right away, and why.

powerGate connects directly with your ERP system. Depending on the ERP system, the way might be different, but the result is the same. In case of Microsoft Dynamics NAV the communication is via webservices, with SAP is via Gatway (REST), with some systems it might be via .Net or via database. So far over 20 different ERP systems have been connected via powerGate, so get in touch with us and let's talk about yours.